LEGRAND Server Technology PRO4X User Manual page 212

• •
LDAP
• • NTP
• •
SMTP
• •
SSH
• •
Telnet
• •
FTP
• • SSL/TLS
• •
SNMP
• •
SysLog
Note: PRO4X disables TLS 1.0 and 1.1 by default. It enables only TLS 1.2 and 1.3.
Common Network Settings
Common Network Settings are OPTIONAL, not required. Therefore, leave them unchanged if there are
no specific local networking requirements.
Field Description
Leave it to the default "None" unless you are establishing a
Cascading
cascading chain.
mode
DNS resolver Determine which IP address is used when the DNS resolver returns
preference both IPv4 and IPv6 addresses.
DNS suffixes Specify a DNS suffix name if needed.
(optional)
212
• •
Setting the Cascading Mode
• •
IPv4 address: Use the IPv4 addresses.
• •
IPv6 address: Use the IPv6 addresses.
(on page 226)