Setting The Date And Time - LEGRAND Server Technology PRO4X User Manual

▶
Login manner after enabling the service agreement:
After the Restricted Service Agreement feature is enabled, the agreement's content is displayed on the
login screen.
To log in when a restricted service agreement appears:
• •
In the web interface, select the checkbox labeled "I understand and accept the restricted service
agreement."
• •
In the CLI, type y when the confirmation message "I understand and accept the restricted service
agreement" is displayed.

Setting the Date and Time

Set the internal clock manually, or link to a Network Time Protocol (NTP) server.
PRO4X follows the NTP server sanity check per the IETF RFC.
Note: If you are using Sunbird's
same date/time or NTP settings.
▶
To set the date and time:
1) Choose Device Settings > Date/Time.
2) Click the 'Time zone' field to select your time zone from the list.
3) If the daylight saving time applies to your time zone, verify the 'Automatic daylight saving time
adjustment' checkbox is selected.
4) Select the method for setting the date and time. Choose settings and click Save.
▶
Customize the date and time
® ®
Power IQ , you must configure Power IQ and the PRO4X to have the
261