LEGRAND Server Technology PRO4X User Manual page 494

Parameters
verifyServerCertificate
<verify_cert>
certificate
allowExpiredCertificate
<allow_exp_cert>
bindDN <bind_DN>
bindPassword
sortPosition <position>
▶
Examples:
• •
Change the IP address of the 1st LDAP server
config:# authentication ldap modify 1 host 192.168.3.3
• •
Change both the IP address and TCP port of the 1st LDAP server
config:# authentication ldap modify 1 host 192.168.3.3 port 633
• •
Change the IP address, TCP port and the type of the L1st DAP server
config:# authentication ldap modify 1 host 192.168.3.3 port 633
serverType activeDirectory
Removing an Existing LDAP Server
This command removes an existing LDAP server from the server list.
494
Description
Enable or disable the certificate verification.
• • <verify_cert> enables or disables the certificate verification feature.
• •
Available values include: true, false
Re-upload a different certificate.
a. First add the "certificate" parameter to the command, and press Enter. a.
b. b. The system prompts you for the input of the certificate.
c. Type or copy the content of the certificate in the CLI and press Enter. c.
Determine whether to accept a certificate which is expired or not valid yet.
• •
<allow_exp_cert> determines whether to accept an expired or not valid yet
certificate
• •
<allow_exp_cert> values include: true, and false
Change the bind DN.
• •
<bind_DN> is the new bind DN.
Change the bind DN password.
a. First add the "bindPassword" parameter to the command, and press a.
Enter.
b. The system prompts you for the input of the password. b.
c. Type the password and press Enter. c.
Change the priority of the server (that is, resorting).
• •
<position> is the new sequential number of the server in the LDAP server list.