LEGRAND Server Technology PRO4X User Manual page 305

Transport Next steps
protocols
A TLS certificate is required. Do the following:
a. Type an appropriate port number in the 'TCP port' field. Default is 6514. a.
b. b. In the 'CA certificate' field, click Browse to select a TLS certificate. After importing the
certificate, you may:
• • Click Show to view its contents.
• Click Remove to delete it if it is inappropriate. •
TCP+TLS
c. Determine whether to select the 'Allow expired and not yet valid certificates' checkbox. c.
• • To always send the event message to the specified syslog server as long as a TLS
• • To prevent the event message from being sent to the specified syslog server when any
Scheduling an Action
An action can be regularly performed at a preset time interval instead of being triggered by a specific
event. For example, you can make the PRO4X report the reading or state of a specific sensor regularly
by scheduling the "Send sensor report" action.
When scheduling an action, make sure you have a minimum of 1-minute buffer between this action's
creation and first execution time. Otherwise, the scheduled action will NOT be performed at the
specified time when the buffer time is too short. For example, if you want an action to be performed at
11:00 am, you should finish scheduling it at 10:59 am or earlier.
▶
Operation:
1) Choose Device Settings > Event Rules >
2) To select any action(s), select them one by one from the 'Available actions' list.
• • To select all available actions, click Select All.
3) To remove any action(s) from the 'Selected actions' field, click that action's
• To remove all actions, click Deselect All. •
4) Select the desired frequency in the 'Execution time' field, and then specify the time interval or a
specific date and time in the field(s) that appear. Use the clock and calendar tools to choose the
schedule. Use the AM/PM button to toggle time settings.
Send Sensor Report Example
To create a scheduled action for emailing a temperature sensor report hourly, it requires:
• •
A 'Send email' action
• •
A 'Send sensor report' action
• •
A timer - that is, the scheduled action
certificate is available, select this checkbox.
TLS certificate in the selected certificate chain is outdated or not valid yet, deselect this
checkbox.
.
.
305