Using Snmp; Enabling And Configuring Snmp; Snmpv3 Notifications - LEGRAND Server Technology PRO4X User Manual

Using SNMP

This SNMP section helps you set up the PRO4X for use with an SNMP manager. The PRO4X can be
configured to send traps or informs to an SNMP manager, as well as receive GET and SET commands in
order to retrieve status and configure some basic settings.
In This Chapter

Enabling and Configuring SNMP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372

SNMPv3 Notifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372

SNMPv2c Notifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374
Downloading SNMP MIB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375
SNMP Gets and Sets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376
Enabling and Configuring SNMP
To communicate with an SNMP manager, you must enable SNMP protocols on the PRO4X. By default,
SNMP is disabled.
The SNMP v3 protocol allows for encrypted communication. To take advantage of this, you must
configure the users with the SNMP v3 access permission and set Authentication Pass Phrase and Privacy
Pass Phrase, which act as shared secrets between SNMP and the PRO4X.
Important: You must download the SNMP MIB for your PRO4X to use with your
SNMP manager.
▶
To enable SNMP v1/v2c and/or v3 protocols:
1) Choose Device Settings > Network Services > SNMP.
2) In the SNMP Agent section, enable SNMP v1/v2c or SNMP v3, and configure related fields, such as
the community strings.
• • If SNMP v3 is enabled, you must determine which users shall have the SNMP v3 access permission.
▶
To configure users for SNMP v3 access:
1) Choose User Management > Users.
2) Create or modify users to enable their SNMP v3 access permission.
• • If authentication and privacy is enabled, configure the SNMP password(s) in the user settings.
SNMPv3 Notifications
1) Choose Device Settings > Network Services > SNMP.
2) In the SNMP Agent, make sure the Enable SNMP v1/v2c checkbox is selected.
3) In the SNMP Notifications section, make sure the 'Enable SNMP notifications' checkbox is selected.
372