LEGRAND Server Technology PRO4X User Manual page 512

▶
Set the Upper Critical threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> upperCritical <option>
▶
Set the Upper Warning threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> upperWarning <option>
▶
Set the Lower Critical threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> lowerCritical <option>
▶
Set the Lower Warning threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> lowerWarning <option>
▶
Set the deassertion hysteresis for an overcurrent protector:
config:# sensor ocp <n> <sensor type> hysteresis <hy_value>
▶
Set the assertion timeout for an overcurrent protector:
config:# sensor ocp <n> <sensor type> assertionTimeout <as_value>
▶
Set the residual current sensor parameters
config:# sensor ocp <n> residualCurrent|residualDCCurrent
upperCritical|upperWarning|lowerWarning|lowerCritical|
hysteresis|assertionTimeout <as_value>
Variables:
• •
<n> is the number of the overcurrent protector that you want to configure.
• •
<sensor type> is one of the following sensor types:
Sensor type
current
512
Description
Current sensor