Connecting A Mobile Device - LEGRAND Server Technology PRO4X User Manual

▶
Configuration via a DHCP-enabled network:
1) Connect the PRO4X to a DHCP IPv4 network.
2) Use the front panel LCD display to retrieve the IP address.
3) Launch a web browser to configure the PRO4X.
▶
Configuration via a connected mobile device:
1) Download the PDView app to your mobile device.
2) Connect the mobile device to PRO4X via USB.
3) Launch PDView to configure the PRO4X.
▶
Configuration via a connected computer:
1) Connect the PRO4X to a computer.
2) Use the connected computer to configure via the command line or web interface.
• • Command line interface: See Initial Network Configuration via CLI.
• • Web interface: Launch a web browser on the computer, and enter the link-local IP address or
pdu.local.

Connecting a Mobile Device

Raritan's PDView is a free app that turns your iOS or Android mobile device into a local display for
PRO4X.
PDView is especially helpful when your PRO4X is not connected to the network but you need to check
status, retrieve information, or change settings.
▶
Requirements for using PDView:
• •
If using an Android device, it must support USB "On-The-Go" (OTG).
• •
An appropriate USB cable is required.
▶
Step A: Download and install PDView
1) Visit either Apple App or Google Play Store.
• • https://itunes.apple.com/app/raritan-pdview/id780382738
• • https://play.google.com/store/apps/details?id=com.raritan.android.pdview
20