Saving User Credentials For Pdview's Automatic Login - LEGRAND Server Technology PRO4X User Manual

If PDView can't log in automatically, the login screen displays instead and you must enter
appropriate user credentials for login.
3) The web interface opens and prompts to change the password if this is the first time login.
Tip: You can store the updated "admin" or other user credentials in PDView so that automatic login
always functions properly upon detection of the PRO4X.

Saving User Credentials for PDView's Automatic Login

When PDView detects PRO4X for the first time, it automatically attempts to log in with the factory-
default user credentials.
If you have modified the factory-default user credentials, PDView's automatic login fails and the login
screen displays for you to manually enter user credentials.
To make automatic login work again, you can save the modified admin credentials or any custom user
credentials in PDView. A maximum of 5 user credentials can be saved, and PDView will try these
credentials one by one until the login succeeds.
The following procedure illustrates iPad only, but the procedure applies to any iOS or Android mobile
device.
▶
To save user credentials in PDView:
1) Make sure your mobile device is NOT connected to the PRO4X so that PDView does NOT perform
the automatic login feature after it is launched.
2) Launch PDView on your mobile device.
3) Tap the top-right Settings icon (iOS) or (Android).
23