Linking In The Cli; Linking Cli Commands - LEGRAND Server Technology PRO4X User Manual

Linking in the CLI

For each unit in a chain, you can list the units, switch to a different unit, add a new link unit, and release
a link unit. You can then use all regular commands as usual to access and control individual units, as
with any standalone unit.
The CLI is disabled on link units. Access to the link unit via the CLI is available only through the primary
CLI.
If any link units are configured, the CLI prompt includes the currently selected unit and Link ID, such as
My Unit (1) or My Unit (2).
Some commands are not available for link units:
• •
Authentication settings
• •
Security settings (login, role-based access control, user blocking, and strong passwords.)
• •
Server monitor
• •
User management

Linking CLI Commands

Commands for Linking begin with pdu.
▶
List the Units in the Linked Chain
Displays the following information for each unit:
58