LEGRAND Server Technology PRO4X User Manual page 452

Variables:
• •
<option> is one of the options: true or false.
Option
true
false
• •
<policy> is one of the options: accept, drop or reject.
Option Description
accept Accepts traffic from all IP addresses.
drop Discards traffic from all IP addresses, without sending any failure
notification to the source host.
reject Discards traffic from all IP addresses, and an ICMP message is sent to
the source host for failure notification.
Managing Firewall Rules
You can add, delete or modify firewall rules using the CLI commands.
• • An IPv4 firewall control rule command begins with security ipAccessControl ipv4 rule.
• •
An IPv6 firewall control rule command begins with security ipAccessControl ipv6 rule.
Adding a Firewall Rule
Depending on where you want to add a new firewall rule in the list, the command for adding a rule
varies.
• •
IPv4 commands
▶
Add a new rule to the bottom of the IPv4 rules list:
config:# security ipAccessControl ipv4 rule add <direction> <ip_mask>
<policy>
▶
Add a new IPv4 rule by inserting it above or below a specific rule:
config:# security ipAccessControl ipv4 rule add <direction> <ip_mask>
<policy> <insert> <rule_number>
-- OR --
452
Description
Enables the IP access control feature.
Disables the IP access control feature.