▶
To show environmental sensor or actuator information:
1) Select "Peripherals" in the Main Menu, and press
2) The display shows a list of environmental sensors/actuators.
•
• When the list exceeds one page, the currently-selected sensor/actuator's ID number and total of
managed sensors/actuators are indicated in the top-right corner of the display.
•
• If any sensor enters warning, critical, or alarmed state, like 'Tamper Detector 1' shown below, it is
highlighted in yellow or red.
The top and bottom bars also turn yellow or red.
Number Description
Sensor or actuator names.
.
87
Need help?
Do you have a question about the Server Technology PRO4X and is the answer not in the manual?