Dsam Cli Commands - LEGRAND Server Technology PRO4X User Manual

DSAM CLI Commands

• •
show
• show sxport [<sxportid>] •
Shows serial access port parameters
• • sxportid Serial access port id (or 'all') (1.1/1.2/all) [all]
Shows DSAM serial port parameters
Example:
# show sxport 1.1
Port ID: 1.1
Name: DSAM 1 - Port 1
Device connected: No
Device interface type: Automatic
Baud rate: 9600
Parity: None
Data bits: 8
Stop bits: 1
Flow control: None
BREAK duration: 300 ms
SSH DPA port enabled: No
SSH DPA port: 10101
Allow shared access: No
Status: Available
• • connect:
Connect to a DSAM serial port
▪ ▪ connect [<sxportid>]
Note: You have write access to this port
199