LEGRAND Server Technology PRO4X User Manual page 70

▶
Internal beeper state:
• •
Active or Off.
• In the Active state, the reason of turning on the beeper is indicated, and the top/bottom bars •
turn red. To mute the beep sound immediately, press
▶
Energy pulse output
Models that support Energy Pulse have an LED Energy Pulse Status page.
By default the energy pulsing is turned off. DO NOT enable this feature unless you have to use
it.
Note: This feature, once enabled, blinks all outlet LEDs proportional to the energy consumption. It can be
used as a simple interface in certification labs where an optical sensor counts the number of pulses and
compares it to the energy reading of a reference meter.
70
.