LEGRAND Server Technology PRO4X User Manual page 436

▶
Determine the outer authentication protocol:
config:# network wireless eapOuterAuthentication <outer_auth>
▶
Determine the inner authentication protocol for authentication set to "EAP + PEAP":
config:# network wireless eapInnerAuthentication <inner_auth>
▶
Set the EAP identity:
config:#
▶
Set the EAP password:
config:#
After performing the above command, the PRO4X prompts you to enter the password. Then type the
password and press Enter.
▶
Provide a Client Certificate for authentication set to "EAP + TLS" or "EAP + PEAP + TLS":
config:#
After performing any certificate or private key commands, including commands for the client certificate,
client private key, and CA certificate, the system prompts you to enter the contents of the wanted
certificate or key. For an example with detailed procedure, see
432).
▶
Provide a Client Private Key for authentication set to "EAP + TLS" or "EAP + PEAP + TLS":
config:#
▶
Provide a CA TLS certificate for EAP:
config:#
436
network wireless eapIdentity <identity>
network wireless eapPassword
network wireless eapClientCertificate
network wireless eapClientPrivateKey
network wireless eapCACertificate
EAP CA Certificate Example (on page