LEGRAND Server Technology PRO4X User Manual page 187

Field Description
Number of Total of available tag ports on this asset strip assembly.
rack units
• • For all AMS2 asset strips, and those AMS asset strips with the
suffix "G3" on its hardware label, the number of its tag ports
(rack units), are automatically detected.
• •
For old AMS "non-G3" asset strips, you must manually set the
number of rack units.
Numbering The rack unit numbering method in a rack/cabinet.
mode
• •
Top-Down: The numbering starts from the highest rack unit of
a rack/cabinet.
• • Bottom-Up: The numbering starts from the lowest rack unit of
a rack/cabinet.
Numbering The start number in the rack unit numbering.
offset
For example, if this value is set to 3, then the first number is 3, the
second number is 4, and so on.
Orientation The asset strip's orientation by indicating the location of its RJ‑45
connector.
• •
Top Connector: The RJ‑45 connector is located on the top.
• • Bottom Connector: The RJ‑45 connector is located on the
bottom.
Asset strips can detect their strip orientation and show it in
this field.
You need to adjust this value only when your asset strips are
the oldest ones without tilt sensors implemented.
Color with Click this field to determine the LED color denoting the presence
connected tag of an asset tag.
• •
Default is green.
Color without Click this field to determine the LED color denoting the absence of
connected tag an asset tag.
• •
Default is red.
For color settings, there are two ways to set the color.
• •
Click a color in the color palette.
• • Type the hexadecimal RGB value of the color, such as #00FF00.
187