LEGRAND Server Technology PRO4X User Manual page 440

Option Description
ETH1/ETH2 ETH1/ETH2 port is the port where the 1st expansion device is
connected.
Usb USB port is the port where the 1st expansion device is connected.
Setting Network Service Parameters
A network service command begins with network services.
Setting the HTTP Port
The commands used to configure the HTTP port settings begin with network services http.
▶
Change the HTTP port:
config:#
▶
Enable or disable the HTTP port:
config:# network services http enabled <option>
▶
Enforce redirection from HTTP to HTTPS:
config:# network services http enforceHttps <option>
Variables:
• •
<n> is a TCP port number between 1 and 65535. The default HTTP port is 80.
• •
<option> is one of the options: true or false.
Option Description
• •
The HTTP port is enabled.
true
- OR -
• •
HTTP redirection to HTTPS is enabled.
• •
The HTTP port is disabled.
false
- OR -
• • HTTP redirection to HTTPS is disabled.
Setting the HTTPS Port
The commands used to configure the HTTPS port settings begin with network services https.
440
network services http port <n>