Showing Information - LEGRAND Server Technology PRO4X User Manual

Results:
• •
The Upper Critical threshold of the 2nd overcurrent protector's RMS current is disabled.
• •
The Upper Warning threshold of the 2nd overcurrent protector's RMS current is set to 15A and
enabled at the same time.
▶
Example 3 - Combination of SSID and PSK Parameters
This multi-command syntax configures both SSID and PSK parameters simultaneously for the wireless
feature.
config:# network wireless SSID myssid PSK encryp_key
Results:
• • The SSID value is set to myssid.
• •
The PSK value is set to encryp_key.
▶
Example 4 - Combination of Upper Critical, Upper Warning and Lower Warning Settings
The following multi-command syntax configures Upper Critical, Upper Warning and Lower Warning
thresholds for the outlet 5 RMS current simultaneously.
config:# sensor outlet 5 current upperCritical disable upperWarning enable
lowerWarning 1.0
Results:
• •
The Upper Critical threshold of outlet 5 RMS current is disabled.
• •
The Upper Warning threshold of outlet 5 RMS current is enabled.
• •
The Lower Warning threshold of outlet 5 RMS current is set to 1.0A and enabled at the same time.

Showing Information

You can use the show commands to view current settings or the status of the PRO4X device or part of it,
such as the IP address, networking mode, firmware version, states or readings of internal or external
sensors, user profiles, and so on.
Some "show" commands have two formats: one with the parameter "details" and the other without.
The difference is that the command without the parameter "details" displays a shortened version of
information while the other displays in-depth information.
After typing a "show" command, press Enter to execute it.
Note: Depending on your login name, the # prompt may be replaced by the > prompt.
385