Outlets - LEGRAND Server Technology PRO4X User Manual

5) To disable additional inlets, repeat the above steps.
• • If disabling an inlet will result in all inlets being disabled, a confirmation dialog appears, indicating
that all inlets will be disabled. Then click Yes to confirm this operation or No to abort it.
After disabling any inlet, the following information or features associated with the disabled one are no
longer available:
• •
Sensor readings, states, warnings, alarms or event notifications associated with the disabled inlet.
• •
Sensor readings, states, warnings, alarms or event notifications for all outlets and overcurrent
protectors associated with the disabled inlet.
• •
The outlet-switching capability, if available, for all outlets associated with the disabled inlet.
Exception: All active energy sensors continue to accumulate data regardless of whether any inlet has
been disabled.
Warning: A disabled inlet, if remaining connected to a power source, continues to receive power from
the connected power source and supplies power to the associated outlets and overcurrent protectors.

Outlets

The Outlets page shows a list of all outlets and the overview of outlet status and data. To open this
page, click 'Outlets' in the Menu.
On this page, you can:
• •
View all outlets' status.
Outlets above or below thresholds are highlighted in yellow or red.
• •
Perform actions on all or multiple outlets simultaneously with setup/power-control commands on
the top-right corner.
Only outlet-switching capable models show the power-control buttons, and you must have
the Switch Outlet permission to perform outlet-switching operations.
Select an outlet checkbox to enable the power control commands.
137