[LINKIDTAG]Firmware upgraded successfully
Device > Firmware
from version '[OLDVERSION]' to version
update completed
'[VERSION]' by user '[USERNAME]' from host
'[USERIP]'.
[LINKIDTAG]Firmware upgrade failed from
Device > Firmware
version '[OLDVERSION]' to version '[VERSION]'
update failed
by user '[USERNAME]' from host '[USERIP]'.
[LINKIDTAG]Firmware upgrade started from
Device > Firmware
version '[OLDVERSION]' to version '[VERSION]'
update started
by user '[USERNAME]' from host '[USERIP]'.
Device > Firmware
[LINKIDTAG]Firmware validation failed by user
validation failed
'[USERNAME]' from host '[USERIP]'.
Device > Hardware
[LINKIDTAG]Failure '[FAILURETYPESTR]'
failure present
asserted for component '[COMPONENTID]'.
Config parameter '[CONFIGPARAM]' changed
Device > Device
to '[CONFIGVALUE]' by user '[USERNAME]'
identification changed
from host '[USERIP]'.
Device > An LDAP error
An LDAP error occurred: [ERRORDESC].
occurred
Device > Network
The [IFNAME] network interface link is now
interface link state is up
up.
Device > Peripheral
Firmware update for peripheral device
Device Firmware
[EXTSENSORSERIAL] from [OLDVERSION] to
Update
[VERSION] [SENSORSTATENAME].
Device > A Radius error
A Radius error occurred: [ERRORDESC].
occurred
Device > Raw
[LINKIDTAG]Raw configuration downloaded by
configuration
user '[USERNAME]' from host '[USERIP]'.
downloaded
Device > Raw
[LINKIDTAG]Raw configuration updated by
configuration updated
user '[USERNAME]' from host '[USERIP]'.
Device > Sending SMS
Sending SMS message to '[PHONENUMBER]'
message failed
failed. [ERRORDESC]
Sending SMTP message to '[SMTPRECIPIENTS]'
Device > Sending SMTP
using server '[SMTPSERVER]' failed.
message failed
[ERRORDESC]
Device > Sending SNMP
Sending SNMP inform to manager
inform failed or no
[SNMPMANAGER]:[SNMPMANAGERPORT]
response
failed or no response. [ERRORDESC]
[LINKIDTAG]Failure
'[FAILURETYPESTR]' deasserted for
component '[COMPONENTID]'.
The [IFNAME] network interface link
is now down.
273
Need help?
Do you have a question about the Server Technology PRO4X and is the answer not in the manual?