Connecting To A Computer - LEGRAND Server Technology PRO4X User Manual

5) Modify existing user credentials or type new ones, and tap Save. The pre-configured admin
credentials can be removed or overwritten to meet your needs.

Connecting to a Computer

The PRO4X can be connected to a computer for configuration via one of the following ports.
• •
Ethernet ports
• •
USB-B port
To use the command line interface (CLI) for configuration, establish a USB connection.
To use a web browser for configuration, make a network connection to the computer. The following link-
local addressing is available in any network without DHCP available:
• •
https://169.254.x.x Use the front panel display to find the address.
• •
https://pdu.local
Establish one of the following connections to a computer.
▶
Direct network connection:
1) Connect one end of a standard network patch cable to an Ethernet port of the PDU.
2) Connect the other end to a computer's Ethernet port.
3) On the connected computer, launch a web browser to access using either link-local addressing:
pdu.local or 169.254.x.x.
25