LEGRAND Server Technology PRO4X User Manual page 524

Variables:
• •
<numbers> is one of the options: all, an outlet number, a list or a range of outlets.
Option
all
A specific outlet
number
A comma- separated
list of outlets
A range of outlets with
a hyphen in between
If you entered the command without "/y", a message appears, prompting you to confirm the operation.
Then:
• •
Type y to confirm the operation, OR
• •
Type n to abort the operation
If you have configured outlet switching sequence and/or delay, PRO4X will prompt you with one more
question:
Should outlet sequence order and delays be used during switching?
• • Type y to apply the current outlet sequence and delay settings when switching on outlets. See
Setting Outlet Power-On Sequence and Delay.
• •
Type n to apply the default sequence and delays.
Turning Off the Outlet(s)
This section applies to outlet-switching capable models only.
This command turns off one or multiple outlets.
# power outlets <numbers> off
To quicken the operation, you can add the parameter "/y" to the end of the command, which confirms
the operation.
#
power outlets <numbers> off /y
524
Description
Switches ON all outlets.
Switches ON the specified outlet.
Switches ON multiple, inconsecutive or consecutive
outlets.
For example, to specify 7 outlets -- 2, 4, 9, 11, 12, 13 and
15, type:
outlets 2,4,9,11-13,15.
Switches ON multiple, consecutive outlets.
For example, to specify 6 consecutive outlets -- 3, 4, 5, 6,
7, 8, type:
outlets 3-8.