LEGRAND Server Technology PRO4X User Manual page 463

▶
Determine the IPv6 role-based access control policy:
config:# security roleBasedAccessControl ipv6 defaultPolicy <policy>
Variables:
• • <option> is one of the options: true or false.
Option Description
true Enables the role-based access control feature.
false Disables the role-based access control feature.
• •
<policy> is one of the options: allow or deny.
Policy Description
allow Accepts traffic from all IP addresses regardless of the user's role.
deny Drops traffic from all IP addresses regardless of the user's role.
Tip: You can combine both commands to modify all role-based access control parameters at a time.
Managing Role-Based Access Control Rules
You can add, delete or modify role-based access control rules.
• • An IPv4 role-based access control command for managing rules begins with security
roleBasedAccessControl ipv4 rule.
• •
An IPv6 role-based access control command for managing rules begins with security
roleBasedAccessControl ipv6 rule.
Adding a Role-Based Access Control Rule
Depending on where you want to add a new rule in the list, the command syntax for adding a rule
varies.
• •
IPv4 commands
▶
Add a new rule to the bottom of the IPv4 rules list:
config:# security roleBasedAccessControl ipv4 rule add <start_ip> <end_ip>
<role> <policy>
463