Overcurrent Protector Information - LEGRAND Server Technology PRO3X User Manual

Variables:
<n> is one of the options: all, or a number.
Option Description
all Displays the information for all inlets.
Tip: You can also type the command without adding
this option "all" to get the same data.
A specific inlet
Displays the information for the specified inlet only.
number
An inlet number needs to be specified only when there
are more than 1 inlet on your PDU.
Displayed information:
Without the parameter details only the inlet's name and RMS current are displayed.
With the parameter details more inlet information is displayed in addition to the inlet name and RMS current, such as the
inlet's RMS voltage, active power and active energy.

Overcurrent Protector Information

This command is only available for models with overcurrent protectors for protecting outlets.
This command syntax shows the overcurrent protector information, such as a circuit breaker or a fuse.
# show ocp <n>
To show detailed information, add the parameter "details" to the end of the command.
# show ocp <n> details
Variables:
<n> is one of the options: all, or a number.
Option Description
all Displays the information for all overcurrent protectors.
Tip: You can also type the command without adding
this option "all" to get the same data.
A specific Displays the information for the specified overcurrent
overcurrent protector only.
protector
number
PRO3X User Guide – Command Line Interface (CLI)
18 of 182
Using the PRO3X Command Line Interface (CLI)