LEGRAND Server Technology PRO4X User Manual page 214

▶
IPv4 settings:
Field/setting
Enable IPv4
IP auto configuration
Preferred hostname
• •
DHCP settings: Optionally specify the preferred hostname, which must meet the following
requirements:
• • Consists of alphanumeric characters and/or hyphens
• • Cannot begin or end with a hyphen
• • Cannot contain more than 63 characters
• • Cannot contain punctuation marks, spaces, and other symbols
• •
Static settings:
• • Assign a static IPv4 address, which follows this syntax "IP address/prefix length".
Example:
• Assign a Default Gateway. •
▶
IPv6 settings:
Field/setting
Enable IPv6
IP auto configuration
Preferred hostname
• •
Automatic settings: Optionally specify the preferred hostname, which must meet the above
requirements.
• •
Static settings:
• • Assign a static IPv6 address, which follows this syntax "IP address/prefix length".
214
Description
Enable or disable the IPv4 protocol.
Select the method to configure IPv4 settings.
• •
DHCP: Auto-configure IPv4 settings via DHCP servers.
• • Static: Manually configure the IPv4 settings.
Enter the hostname you prefer for IPv4 connectivity
192.168.84.99/24
Description
Enable or disable the IPv6 protocol.
Select the method to configure IPv6 settings.
• • Automatic: Auto-configure IPv6 settings via DHCPv6.
• •
Static: Manually configure the IPv6 settings.
• •
Enter the hostname you prefer for IPv6 connectivity