LEGRAND Server Technology PRO4X User Manual page 449

Setting the Time Zone
The CLI has a list of time zones to configure the date and time for PRO4X.
config:#
After a list of time zones is displayed, type the index number of the time zone or press Enter to cancel.
▶
To set the time zone:
1) Type the time zone command as shown below and press Enter.
config:#
2) The system shows a list of time zones. Type the index number of the desired time zone and press
Enter.
3) Type apply for the selected time zone to take effect.
Setting the Automatic Daylight Savings Time
This command determines whether the daylight saving time is applied to the time settings.
config:# time autoDST <option>
Variables:
• •
<option> is one of the options: enable or disable.
Mode Description
enable Daylight savings time is enabled.
disable Daylight savings time is disabled.
Checking the Accessibility of NTP Servers
This command verifies the accessibility of NTP servers specified manually and then shows the result.
To perform this command successfully, you must:
• •
Own the "Change Date/Time Settings" permission.
• •
Customize NTP servers.
This command is available either in the administrator/user mode or in the configuration mode.
time zone
time zone
449