Delta AS Series Programming Manual page 95

AS Ser ies Pro gra mm in g M anu al
Special auxiliary
relay
SM1008–SM1015
SM1016–SM1031
SM1001
_2
SM1006
SM1008—SM1015
SM1016—SM1031
SM1090
SM1091
SM1100
SM1106
SM1107
SM1109
SM1111
SM1113
SM1116
SM1117
SM1119
SM1120
SM1122–SM1123
SM1124
SM1125
SM1126–SM1127
SM1129
SM1130
SM1132
SM1133
SM1134
SM1135
SM1136
SM1137
SM1139
SM1140
SM1142
SM1143
SM1144
SM1145
SM1146
SM1147
SM1149
SM1150
SM1152
SM1153
SM1154
2 - 7 2
You set the flag to ON or OFF.
The flag is ON, when the system is refreshed automatically.
ON: the Ethernet connection is active.
OFF: the Ethernet connection is not active.
After the parameters of data exchange are downloaded, you set the flag to ON or OFF.
After the parameters of data exchange are downloaded, you set the flag to ON or OFF.
The flag is ON, when the system is refreshed automatically.
ON: the TCP connection is busy.
ON: the UDP connection is busy.
The flag is refreshed when API 2200-API 2210 is executed or the network cable is reconnected.
ON: the PHY initialization fails.
ON: the IP address, the netmask address, and the gateway address are set incorrectly.
ON: the socket function is enabled and the same port is used.
You set the flag to ON or OFF.
ON: there is a server error.
ON: the trigger of the PLC parameter is enabled.
ON: the trigger of the PLC parameter is triggered.
ON: the trigger is enabled and the last mail has been sent successfully.
ON: the trigger is enabled and the last mail has been sent with an error.
ON: the trigger is enabled and there is an SMTP server response timeout.
ON: the trigger is enabled and the size of the attachment exceeds the limit.
ON: the trigger is enabled and the attachment is not found.
ON: the trigger of the PLC parameter is enabled.
ON: the trigger is enabled and the last mail has been sent successfully.
ON: the trigger is enabled and the last mail has been sent with an error.
ON: the trigger is enabled and there is an SMTP server response timeout.
ON: the trigger is enabled and there is an SMTP server response error.
ON: the trigger is enabled and the size of the attachment exceeds the limit.
ON: the trigger is enabled and the attachment is not found.
ON: the trigger for the PLC parameter is enabled.
ON: the trigger for the PLC parameter is triggered.
ON: the trigger is enabled and the last mail has been sent successfully.
ON: the trigger is enabled and the last mail has been sent with an error.
ON: the trigger is enabled and there is an SMTP server response timeout.
ON: the trigger is enabled and there is an SMTP server response error.
ON: the trigger is enabled and the size of the attachment exceeds the limit.
ON: the trigger is enabled and the attachment is not found.
ON: the trigger for the PLC parameter is enabled.
ON: the trigger for the PLC parameter is triggered.
ON: the trigger is enabled and the last mail has been sent successfully.
ON: the trigger is enabled and the last mail has been sent with an error.
ON: the trigger is enabled and there is an SMTP server response timeout.
ON: the trigger is enabled and there is an SMTP server response error.
ON: the trigger is enabled and the size of the attachment exceeds the limit.
Refresh time