Delta AS Series Programming Manual page 165

AS Ser ies Pro gra mm in g M anu al
 SM1090, SM1091, SM1106-SM1109
SM
SM1090
SM1091
SM1110
_2
SM1106
SM1107
SM1109
For the error codes, the corresponding LED indicators, and other troubleshooting, Refer to Chapter 12 in the AS300
Series Operation Manual.
19. Email settings
 SM1113, SM1116-SM1155
If the sending an email fails, the flag of the email service error SM1113 is ON.
The following table lists the triggers for sending email and the corresponding flags (SM1116–SM1155).
Function
Email service
Email sending
Emails sent successfully
Email sending error 1
SMTP response timeout
SMTP server response
error
Email sending error 2 of
Email sending Error 3
2 - 1 4 2
Function
TCP connection is busy.
UDP connection is busy.
AS-FEN02 Ethernet - Filter Setting
Error
Ethernet connection error
Ethernet basic setting error
TCP/UDP socket local port is already
used.
Item
Trigger 1
SM1116
SM1117
SM1119
SM1120
SM1122
After sending the email, the SMTP server response timeout.
SM1123
SM1124
After sending the email, the size of the attachment exceeds the limit.
SM1125
After sending the email, the attachment is not found, SM1125 is ON.
ON: TCP connection timeout
ON: UDP connection timeout
When the program is downloaded to the PLC
ON: PHY initialization fails.
OFF: PHY initialization succeeds.
ON: basic setting error
OFF: correct basic setting
ON: the same port in use
Trigger 2
SM1126
ON: enabled, OFF: disabled
SM1127
ON: sending email now, OFF: email sent
SM1129
ON: email sent successfully
SM1130
The email cannot be sent due to email content error
SM1132
SM1133
After sending the email, the SMTP server response error.
SM1134
SM1135
Action
Trigger 3 Trigger 4
SM1136 SM1146
SM1137 SM1147
SM1139 SM1149
SM1140 SM1150
SM1142 SM1152
SM1143 SM1153
SM1144 SM1154
SM1145 SM1155