Delta AS Series Programming Manual page 94

Special auxiliary
relay
SM569–SM569 You set the flag to ON or OFF.
SM572 The system sets the flag to ON or OFF.
SM573 The system sets the flag to ON and you reset it to OFF.
SM574 You set the flag to ON or OFF.
SM578–SM579 You set the flag to ON or OFF and the system sets the flag to OFF.
You set the flag to ON and the system resets it to OFF.
SM580
ON: disable high-speed output
SM585 You set the flag to ON or OFF and the system sets the flag to OFF.
SM586--SM587 You set the flag to ON or OFF.
The system automatically sets the flag to ON and resets it to OFF.
SM600–SM602
The flag is refreshed when the instruction is executed.
SM603 Execute XCMP instruction.
You set SM604 to ON and reset it to OFF.
SM604 ON: sort in descending order
OFF: sort in ascending order
SM605 You set SM605 to ON and reset it to OFF.
You set SM606 to ON and reset it to OFF.
SM606 ON: 8-bit mode
OFF: 16-bit mode
SM607 You set the flag to ON or OFF.
The flag is refreshed when the instruction is executed.
SM608
SM609 You set the flag to ON or OFF.
SM610–SM611 The flag is refreshed when the instruction is executed.
SM612–SM613 You set the flag to ON or OFF.
The flag is refreshed when the instruction is executed.
SM614
SM615–SM617 You set the flag to ON or OFF.
SM618 The flag is refreshed when the instruction is executed.
SM619 The flag is refreshed when the EI or DI instruction is executed.
SM620 The flag is refreshed when the CMPT instruction is executed.
SM621–SM686 You set the flag to ON or OFF.
SM687 The flag is refreshed when the RAMP instruction is executed.
SM688 The flag is refreshed when the INCD instruction is executed.
SM690–SM691 You set the flag to ON or OFF.
SM692 The flag is refreshed when the HKY instruction is executed.
SM693 The flag is refreshed when the SEGL instruction is executed.
SM694 The flag is refreshed when the DSW instruction is executed.
SM695 You set the flag to ON or OFF.
SM749 The system is refreshed at power-on after the data exchange parameters are downloaded.
SM750–SM783 After the data exchange parameters are downloaded, you set the flag to ON or OFF.
SM784–SM847 The flag is ON when the system is refreshed.
SM861 The system is refreshed at power-on after the data exchange parameters are downloaded.
SM862–SM895 After the parameters of data exchange are downloaded, you set the flag to ON or OFF.
SM896–SM959 The flag is ON, when the system is refreshed automatically.
SM976-SM990 The flag is ON, when the system is refreshed automatically.
SM1000 You set the flag to ON and after saving, the system sets the flag to OFF.
SM1006 You set the flag to ON or OFF.
Refresh time
Cha p ter 2 De vices
2 - 7 1
2_