Delta AS Series Programming Manual page 168

Error code
16#F000
16#F001
16#F003
16#F007
16#F009

The list of SM/SR states when connecting to RTU-EN01 throught Ethernet port
SM / SR
SM1312 - SM1315
SR1312 - SR1315
SR SM state
0 Off
1 On
2 Off
3 Off
4 Off
5 Off
6 Off
SM state
Off  On
On  Off
Note: Before the connection is established, it is suggested NOT to use data (RX/RY/RCR Read/RCR Write) in the
mapping area.

Ethernet/IP communication flags are available for PLC FW V1.06 or later.
SM
SM1375
SM1376 - SM1407
SM1408 - SM1439
SM1440 - SM1447
*1
SM1448 – SM1455
*1: only available for PLC FW V1.06.50 or later

Ethernet/IP communication registers are available for PLC FW V1.06 or later.
SR
SR1020 - SR1051

Ethernet/IP communication error codes are listed below. Refer to Chapter 9 in AS Series Operation Manual for
more details.
Error Code
16#0100 I/O connections duplicated
16#0106 Scanner ownership of I/O
Ethernet connection is not established
Remote module response timeout
TCP connection timeout
Response error
Connection lost in the remote module
The communication state flags of RTU-EN01 connection ID 1-4
The communication state codes of RTU-EN01 connection ID 1-4
Connection closed
Successful connection
Communiction timeout
Connection closed by force
RTU-EN01 response: error in contents
RTU-EN01 response: error
Network not connected or connection failed
RX & RCR Read data
(input mapping area)
Clear to 0
No change
Attr.
R/W
Data exchange through EtherNet/IP (Scanner) started.
R/W
Connection 1-32 for data exchange through EtherNet/IP (Scanner) started
R
Error in data exchange connection 1-32 through EtherNet/IP (Scanner)
R
Error in I/O connection 1-8 through EtherNet/IP (Adapter)
R
I/O connection 1-8 is established through EtherNet/IP (Adapter)
Attr.
Status code of the connection 1-32 for data exchange through EtherNet/IP
R
(Scanner)
Description
1. Check if the system has created the I/O
2. Change the connection type to Listen Only.
1. Check the scanner owner.
Description
Description
Description
RY & RCR Write data
(output mapping area)
Ethernet/IP Data Exchange Description
Ethernet/IP Data Exchange Description
Solution
connections.
Cha p ter 2 De vices
Clear to 0
No change
2 - 1 4 5
2_