Delta AS Series Programming Manual page 147

AS Ser ies Pro gra mm in g M anu al
Special data
register
SR1020–SR1107
SR1116–SR1117
SR1120–SR1183
_2
SR1312-SR1315
SR1318–SR1320
SR1335–SR1336
SR1340–SR1371
SR1375–SR1376
SR1380–SR1411
SR1435–SR1436
SR1440–SR1471
SR1475–SR1476
SR1480–SR1511
SR1520–SR1535
SR1536–SR1539
SR1559–SR1592
SR1600-SR1602
SR1603-SR1605
SR1700, SR1702,
SR1704, SR1706,
SR1708, SR1710
2 - 1 2 4
1. Refresh the register when a connection is established.
2. Refresh the register every scan cycle.
Refresh the register when the program is downloaded to the PLC.
Refresh the register when the communication is complete.
Refresh the register during communication
Refresh the register when the parameter is downloaded to the PLC, or when the PLC is supplied
with power.
Refresh the register every scan cycle after the function of data exchange is enabled.
Refresh the register when there is an error.
Refresh the register every scan cycle after the function of data exchange is enabled.
Refresh the register when there is an error.
Refresh the register during communication
Refresh the register when error occurs during communication
Refresh the register during communication
Refresh the register when error occurs during communication
Refresh the register after the communidation through AS-FEN02 is complete.
Register is refreshed by the system.
Register is refreshed by the system when when the system is supplied with power, disconnect from
the remote module or reestablish the remote module connection.
Register is refreshed by you.
The error occurred on the drive during parameters restoration; Register is refreshed by the system.
Register is refreshed by you.
Time to refresh