Delta AS Series Programming Manual page 179

Hide thumbs Also See for AS Series:

Table of Contents

AS Ser ies Pro gra mm in g M anu al

Use the above-mentioned new SM in the PLC program.

Set M0 to ON to trigger SM120 to ON to save the DPLSY to-be-outputted parameters (outputting 1000 pulses at 1kHz

frequency) to the PLC flash memory.

Stat HC200 high-speed counter and set SM360 to ON. When the counted value in S

comparison interrupt I200 is triggered. The moment when the interrupt is triggered, Y0.0 starts to output 1000 pulses at

1kHz frequency.

reached 50, the high-speed

Show Quick Links

Table of Contents

Troubleshooting