Delta AS Series Programming Manual page 145

AS Ser ies Pro gra mm in g M anu al
Special data
register
SR472
SR474
SR476–SR477
_2
SR480
SR482–SR486
SR487
SR488–SR489
SR490
SR492
SR494
SR496–SR497
SR500
SR502–SR506
SR507
SR508–SR509
SR510
SR512
SR514
SR516–SR517
SR520
SR522–SR526
SR527
SR528–SR529
SR530
SR532
SR534
SR536–SR537
SR540
SR542–SR546
SR547
SR548–SR549
SR550
SR552
SR554
2 - 1 2 2
Register is refreshed you.
Refresh the register whenever the high-speed output instruction is executed and the program is
scanned. If the instruction is not executed, you can edit the settings.
Register is refreshed by you.
Refresh the register whenever the high-speed output instruction is executed and the program is
scanned. If the instruction is not executed, you can edit the settings.
Register is refreshed by you.
Register is refreshed by the system.
Refresh the register when the PLC is powered on according to the position planning table. You can
edit the settings afterwards.
Register is refreshed by the system.
Register is refreshed by you.
Refresh the register whenever the high-speed output instruction is executed and the program is
scanned. If the instruction is not executed, you can edit the settings.
Register is refreshed by you.
Refresh the register whenever the high-speed output instruction is executed and the program is
scanned. If the instruction is not executed, you can edit the settings.
Register is refreshed by you.
Register is refreshed by the system.
Refresh the register when the PLC is powered on according to the position planning table. You can
edit the settings afterwards.
Register is refreshed by the system.
Register is refreshed by you.
Refresh the register whenever the high-speed output instruction is executed and the program is
scanned. If the instruction is not executed, you can edit the settings.
Register is refreshed by you.
Refresh the register whenever the high-speed output instruction is executed and the program is
scanned. If the instruction is not executed, you can edit the settings.
Register is refreshed by you.
Register is refreshed by the system.
Refresh the register when the PLC is powered on according to the position planning table. You can
edit the settings afterwards.
Register is refreshed by the system.
Register is refreshed by you.
Refresh the register whenever the high-speed output instruction is executed and the program is
scanned. If the instruction is not executed, you can edit the setting.
Register is refreshed by a user.
Refresh the register whenever the high-speed output instruction is executed and the program is
scanned. If the instruction is not executed, you can edit the settings.
Register is refreshed by a user.
Register is refreshed by the system.
Refresh the register when the PLC is supplied with power according to the position planning table.
You can edit the settings afterwards
Register is refreshed by the system.
Register is refreshed by you.
Refresh the register whenever the high-speed output instruction is executed and the program is
scanned. If the instruction is not executed, you can edit the settings.
Time to refresh