Table of Contents
Advertisement
11.2
Error Messages and System Alarms
This section explains the error messages and system alarms displayed on the GOT.
The system alarm function displays the error code and error message when an error occurs in the GOT, controller, or network.
For the details of the system alarm, refer to the following.
GT Designer3 (GOT2000) Screen Design Manual
Error code and channel No.
You can check error codes in the error code storage area of the system information function.
You can check the channel No. where an error occurs with the GOT special register (GS262 to 264).
For the details of the system information and GOT special register, refer to the following.
GT Designer3 (GOT2000) Screen Design Manual
Displayed contents
The section explains an example of displaying an error code and error message on the GOT.
Displaying the error codes and error messages with the popup display (Alarm popup
display)
When an error occurs, the GOT can display the error code and error message with the popup display at the front of the
monitor screen.
Since an alarm pops up regardless of the screen, you cannot miss the error.
Displaying the error codes and error messages in a list (System alarm display)
When an error occurs, the GOT can display the error codes and error messages in the list set on the screen.
Displaying multiple errors and recording the events as history are available.
11 TROUBLESHOOTING
116
11.2 Error Messages and System Alarms
A 1254
A 1254
B
B
348
348
04/6/1 13:20 Power module
Generated alarms are popped up
regardless of the screen.
Date
Time
Message
Recovered
04/6/1
10:25
Temp.error
04/6/1
8:05
Fuse error
11:25
Create a screen to display alarms,
and confirm the details of the alarms
and take measures for the errors.
Checked
10:45
Advertisement
Table of Contents
Troubleshooting
