Navigating Through The Menu - Mitsubishi Electric CITY MULTI PAR-40MAA Instruction Book

Navigating through the menu

Main menu list
Main menu Setting items
Operation Vane•Louver•Vent.
(Lossnay)
High power
Comfort
Timer Timer
Weekly timer
OU silent mode
Night setback
Energy Restriction Temp.
saving
Energy
saving
Use to set the vane angle.
• Select a desired vane setting from five different settings.
Use to turn ON/OFF the louver.
• Select a desired setting from "ON" and "OFF."
Use to set the amount of ventilation.
• Select a desired setting from "Off," "Low," and "High."
Use to reach the comfortable room temperature quickly.
• Units can be operated in the High-power mode for up to 30 minutes.
Manual Use to fix each vane angle.
vane
angle
On/Off Use to set the operation On/Off times.
timer • Time can be set in 5-minute increments.
* Clock setting is required.
Auto-Off Use to set the Auto-Off time.
timer • Time can be set to a value from 30 to 240 in 10-minute
increments.
Use to set the weekly operation On/Off times.
• Up to eight operation patterns can be set for each day.
• Two types of weekly schedules can be set.
* Clock setting is required.
* Not valid when the On/Off timer is enabled.
* 1ºC increments
Use to set the time periods in which priority is given to quiet
operation of outdoor units over temperature control. Set the
Start/Stop times for each day of the week.
• Select the desired silent level from "Normal," "Middle," and
"Quiet."
* Clock setting is required.
Use to make Night setback settings.
• Select "Yes" to enable the setting, and "No" to disable the setting.
The temperature range and the start/stop times can be set.
* Clock setting is required.
* 1ºC increments
Use to restrict the preset temperature range.
range • Different temperature ranges can be set for different operation
modes.
* 1ºC increments
Operation Use to lock selected functions.
locked • The locked functions cannot be operated.
Auto Use to get the units to operate at the preset temperature after
return performing energy-save operation for a specified time period.
• Time can be set to a value from 30 and 120 in 10-minute
increments.
* This function will not be valid when the preset temperature ranges
are restricted.
* 1ºC increments
Setting details