Basic Settings - Mitsubishi Electric MELSEC iQ-R Series User Manual

Basic Settings

Set the items such as the network configuration and refresh settings of the CC-Link IE TSN Plus module.
In this manual, "Authentication Class" is described as "CC-Link IE TSN Class".
: Can be set, : Cannot be set
Item
Network Configuration
Settings
Refresh Setting
Network Topology
Communication Period
Setting
Connection Device
Information
Slave Station Setting
Own Node Settings
External Device
Configuration
8 PARAMETER SETTINGS
76
8.1 Parameter Settings for CC-Link IE TSN
Description
Set parameters of slave stations (the number of points and
assignment of link devices) in the master station.
Assign link refresh ranges between the devices described
below.
• Module label between SB/SW of CC-Link IE TSN and the
CPU module.
• Device between SB/SW/link devices (RX, RY, RWr, RWw, LB,
LW) of CC-Link IE TSN and the CPU module.
Select the network topology type according to the actual
network configuration.
Set the basic cycle setting and multiple cycle setting.
Set the CC-Link IE TSN Class of connected devices and
whether to use the TSN hub.
Set the number of consecutive communication failures until a
slave station is considered disconnected.
Set items related to the own node.
Set the method and protocol used for communicating with
external devices.
Availability
Master Local
station station
 
 
 
 
 
 
 
 
Reference
Page 97 "CC-Link IE TSN
Configuration" window
Page 77 Refresh Setting
Page 79 Network Topology
Page 80 Communication
Period Setting
Page 81 Connection Device
Information
Page 81 Slave Station
Setting
Page 81 Own Node Settings
Page 82 External Device
Configuration