Mitsubishi Electric MELSEC iQ-R Series User Manual page 135

8.
Configure the settings to receive data from "Producer" (target) using the own station (originator) as "Consumer".
Select "Adapter" in "Connection List" and click the [Add Connection] button.
9.
Select "Connection (Adapter Tag Communications)" in "Select Connection to be Added:" and click the [OK] button.
10.
Set the parameter for the Class1 tag communications in "Connection Detailed Setting". ( Page 120 Connections:
Adapter (Tag communications))
11.
Click the [OK] button to reflect the parameter.
12.
Select [Close with Reflecting the Setting] and close the "EtherNet/IP Configuration" window.
8 PARAMETER SETTINGS
8.2 EtherNet/IP Parameter Settings
8
133