*1 The switching hub delay time changes depending on the hub models and settings.
*2 Total number of points is the smallest value set in "Start" to the largest value set in "End" of "Network Configuration Settings".
*3 This is the slave station with the largest calculation value when, for each slave station (including extension modules), (("RX setting" +
"LB setting")/8) + (("RWr setting" + "LW setting") 2) is calculated.
*4 Calculate by rounding up each calculation result in brackets.
*5 In "Inter-module Synchronization Setting" under "System Parameter" of the master station, "Use Inter-module Synchronization Function
in System" is set to "Not Use" or "Select Inter-module Synchronization Target Module" is set to "Do Not Synchronize".
Appendix 6 CC-Link IE TSN Processing Time
A
APPX
537