Mitsubishi Electric MELSEC iQ-R Series User Manual page 331

3.
Set the CC-Link IE TSN Plus module (RJ71GN11-EIP) as follows.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]
4.
Click the [OK] button to add a module label of the CC-Link IE TSN Plus module.
5.
Set the items in "Basic Settings" as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GN11-EIP(T+E)]  [Port2 Module Parameter
(EtherNet/IP)]  [Basic Settings]
6.
Click the [Apply] button.
7.
Set the EtherNet/IP communication parameters in "EtherNet/IP Configuration".
[Navigation window]  [Parameter]  [Module Information]  [RJ71GN11-EIP(T+E)]  [Port2 Module Extended
Parameter]
13.5 Class3 Message Communications Communication Example
13 PROGRAMMING
329
13