Mitsubishi Electric MELSEC iQ-R Series User Manual page 138

Setting the Class3 tag communications
To perform Class3 tag communications for the EtherNet/IP device, follow the procedure below.
1.
Connect the engineering tool to the originator side and register the EDS file of the target side from the "EtherNet/IP
Configuration" window. ( Page 129 Adding the EDS file)
2.
Select the EtherNet/IP device of the target side in "Module List" and drag it to the list of EtherNet/IP devices.
3.
Set the items such as the device name and IP address of the EtherNet/IP device of the target side.
4.
Double-click "<Detailed Setting>" in the "Connection Setting" column and set the connection of the EtherNet/IP device.
(The setting window that opens from "<Detailed Setting>" of each line is the same.)
5.
Configure the settings to send data to the server (target) using the own station (originator) as a client.
Select the EtherNet/IP device under "Scanner" in "Connection List" and click the [Add Connection] button.
6.
Select "Connections (Class3 Tag Communications)" in "Select Connection to be Added:" and click the [OK] button.
7.
Set the parameter for the Class3 tag communications in "Connection Detailed Setting". ( Page 127 Connections:
Scanner (Class3 tag communications))
8.
Configure the settings to receive data from the client (target) using the own station (originator) as a server.
The setting procedure is the same as the UCMM tag communications. ( Page 134 Setting the UCMM tag
communications)
9.
Click the [OK] button to reflect the parameter.
10.
Select [Close with Reflecting the Setting] and close the "EtherNet/IP Configuration" window.
8 PARAMETER SETTINGS
136
8.2 EtherNet/IP Parameter Settings