11
PARAMETER SETTINGS
Set the parameters of the R60AD8-G.
11.1
Basic Settings
Setting procedure
Open "Basic setting" of the engineering tool.
1.
Start Module Parameter.
[Navigation window] [Parameter] [Module Information] Target module [Module Parameter] [Basic setting]
2.
Double-click on an item to be changed and enter a setting value.
• Item where a value is selected from a drop-down list
Click the [] button of the item to be set to display a drop-down list. Select an item.
• Item where a value is entered into a text box
Double-click on the item to be set and enter a numerical value.
11 PARAMETER SETTINGS
294
11.1 Basic Settings