2.3
Basic Settings
Set the network configurations, refresh settings, or other parameters for the Simple Motion module.
Item
Network Configuration
Settings
Refresh Settings
Network Topology
2 PARAMETER SETTINGS
66
2.3 Basic Settings
Description
Set parameters of slave stations (the number of points and assignment of link devices) in
the master station.
Set link refresh ranges between the devices of the CPU module and the link special relay
(SB), link special register (SW), and link devices of the Simple Motion module, or between
the module label of the CPU module and the link special relay (SB) and link special
register (SW) of the Simple Motion module.
Select the topology type according to the actual network configuration.
Reference
Page 67 Network Configuration
Settings
Page 70 Refresh Settings
Page 73 Network Topology