Mitsubishi Electric MELSEC iQ-R Series User Manual page 112

Device number reassignment
Assign the device numbers successively to the link device of the specified target station.
For the number of link device points, the points assigned in the list of stations on the "CC-Link IE TSN Configuration" window
are used.
1.
Display "Device No. Reassignment".
[CC-Link IE TSN Configuration]  [Device No. Reassignment]
2.
Enter the values in the "Device No. Reassignment" and click the [Apply] button.
When the [Apply] button is clicked with the checkbox of "Assign Default Points of Module in Link Device
Points" selected, the default points of each module are reassigned. However, if a default number of points is 0,
the number of points of corresponding link device is not assigned.
8 PARAMETER SETTINGS
110
8.1 Parameter Settings for CC-Link IE TSN