Mitsubishi Electric MELSEC iQ-R Series User Manual page 491

• EtherNet/IP communication does not start (error)
Performed by a program
Performed by the RJ71GN11-EIP
Parameter setting
'EtherNet/IP communication
start request' (Un\G7340096)
'EtherNet/IP communication in
process' (X10)
'Own error' (XE)
ERR.LED
(1) A value other than 0 set for EtherNet/IP communication start request
(2) 0 set for EtherNet/IP communication start request
(3) Error occurred
(4) No error
(5) Error occurring
• A value other than 16 (Stop) is set for 'EtherNet/IP communication continuation specification status' (Un\G7340104).
Performed by a program
Performed by the RJ71GN11-EIP
Parameter setting
'EtherNet/IP communication
start request' ((Un\G7340096)
'EtherNet/IP communication
in process' (X10)
EtherNet/IP communications
(1) A value other than 0 set for EtherNet/IP communication start request
(2) The operating status of the CPU module changed from RUN to STOP, or a stop error has occurred to the CPU module.
(3) EtherNet/IP communications available
• 16 (Continue) is set for 'EtherNet/IP communication continuation specification status' (Un\G7340104).
Performed by a program
Performed by the RJ71GN11-EIP
Parameter setting
'EtherNet/IP communication
start request' (Un\G7340096)
'EtherNet/IP communication
in process' (X10)
EtherNet/IP communications
(1) A value other than 0 set for EtherNet/IP communication start request
(2) The operating status of the CPU module changed from RUN to STOP, or a stop error has occurred to the CPU module.
(3) EtherNet/IP communications available
(1) (1)
(3) (3)
(4)
(1)
(3)
(1)
(3)
(2) (2)
(5)
(2)
(2)
APPX
Appendix 3 Buffer Memory
A
489