Mitsubishi Electric MELSEC iQ-R Series User Manual page 308

Setting the CC-Link IE TSN Plus module (target 2)
Connect the engineering tool to the target 2-side CPU module and set the parameters.
1.
Set the CPU module and add the CC-Link IE TSN Plus module. The setting method of the CPU module and addition
method of the CC-Link IE TSN Plus module are the same as those of the CC-Link IE TSN Plus module (originator). (
Page 299 Setting the CC-Link IE TSN Plus module (originator))
2.
Set the items in "Basic Settings" as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GN11-EIP(T+E)]  [Port2 Module Parameter
(EtherNet/IP)]  [Basic Settings]
3.
Set the "Refresh Setting" as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GN11-EIP(T+E)]  [Port2 Module Parameter
(EtherNet/IP)]  [Basic Settings]  [Refresh Settings]
4.
Click the [Apply] button.
5.
Set the EtherNet/IP communication parameters in "EtherNet/IP Configuration".
[Navigation window]  [Parameter]  [Module Information]  [RJ71GN11-EIP(T+E)]  [Port2 Module Extended
Parameter]
6.
Double-click "<Detailed Setting>" in the "Connection Setting" column and set the connection of the originator.
13 PROGRAMMING
306
13.2 Class1 Communications Communication Example