Checking the network status
Once parameters are set for the master station and local station, check whether data links between the master station and
local station is normally operating. Use the CC-Link IE TSN/CC-Link IE Field diagnostics of the engineering tool to check the
status.
1.
Connect the engineering tool to the CPU module on the master station.
2.
Start the CC-Link IE TSN/CC-Link IE Field diagnostics.
[Diagnostics] [CC-Link IE TSN/CC-Link IE Field Diagnostics]
If the following display appears, a data link is normal.
In this manual, "Authentication Class" is described as "CC-Link IE TSN Class".
If an error icon appears in "Network Status" area, use the CC-Link IE TSN/CC-Link IE Field diagnostics to identify the cause of
the error and take corrective actions. ( Page 372 CC-Link IE TSN/CC-Link IE Field Diagnostics)
11.2 Communication Example of the Master Station and Local Stations
11 PROGRAMMING
225
11