Application Settings - Mitsubishi Electric MELSEC iQ-R Series User Manual

Application Settings

Set the supplementary cyclic settings, transient transmission group number, and other settings for the CC-Link IE TSN Plus
module.
: Can be set, : Cannot be set
Item Description
Communication Speed Set the communication speed.
Supplementary Cyclic Set the station-based block data assurance and I/O
Settings maintenance settings.
Transient Transmission Set the transient transmission group number.
Group No.
Communication Mode Set the communication mode.
Parameter Name Set a name for the module parameter if desired.
Dynamic Routing Select whether to enable the dynamic routing function.
Event Reception from Select whether to obtain the events occurring in the
Other Stations other stations.
Module Operation Mode Set the module operation mode.
Security Set the security measures for access to the Ethernet
device.
Interlink Transmission Set link device ranges when cyclic data are transferred
Settings from a station in the own network to a station in a
different network.
Timer Settings for Data Set the timer used for the following communications.
Communication • Connection with MELSOFT product
• Communications using the SLMP
• Socket communications
Gateway Parameter Set this item to communicate with an external device on
Settings Ethernet via a router and gateway.
*1 "Station-based Block Data Assurance" cannot be set.
Availability
Master Local
station station
 
*1
 
 
 
 
 
 
 
 
 
 
 
8 PARAMETER SETTINGS
8.1 Parameter Settings for CC-Link IE TSN
Reference
Page 86 Communication Speed
Page 86 Supplementary Cyclic
Settings
Page 86 Transient Transmission
Group No.
Page 86 Communication Mode
Page 86 Parameter Name
Page 87 Dynamic Routing
Page 87 Event Reception from
Other Stations
Page 87 Module Operation Mode
Page 88 Security
Page 88 Interlink Transmission
Settings
Page 92 Timer Settings for Data
Communication
Page 94 Gateway Parameter
Settings
8
85