Mitsubishi Electric MELSEC iQ-R Series User Manual page 383

Selected Station Communication Status Monitor
Displays status of the station selected in "Network Status".
■Normal operation
(1)
(3)
(6)
(7)
In this manual, "Authentication Class" is described as "CC-Link IE TSN Class".
No. Description
(1) Indicates the station number and operating status.
■Normal operation
• Station number No error (light blue): Normal operation
■Error status
• Station number Error (yellow): Error (Data link is continued)
• Station number Error (red): Error (Data link is stopped)
(2) Displays the network type.
(3) Displays the MAC address of P1.
(4) Displays the IP address of P1.
(5) Click this button to check error details. Take actions following the description displayed in "Error Factor" and "Troubleshooting".
(6) The LED status of a module and communication status of P1 is displayed. ( Page 66 PART NAMES)
(7) The status of the Ethernet cable connected to P1 is displayed.
*1 When 00-00-00-00-00-00 is displayed as a MAC address, the status of the selected station cannot be checked with the selected station
communication status monitor. Check the error details by directly connecting the engineering tool to the station where an error occurs,
and opening the "System Monitor" window.
■When a selected station is not available for communication status monitor
The information of devices are not displayed. The "Error details" window (detailed information, error factor, troubleshooting) is
displayed.
■Error status
(2)
(1)
(3)
(4)
(5)
(6)
(7)
*1
17 CHECKING THE NETWORK STATUS
17.1 Checking the Status of CC-Link IE TSN
17
(2)
(4)
381