Mitsubishi Electric MELSEC iQ-R Series User Manual page 376

Usage methods
The following describes how to use the CC-Link IE TSN/CC-Link IE Field diagnostics.
■When "No Specification" is specified in "Other Station Setting" on the "Specify Connection
Destination Connection" window
1.
Connect the engineering tool to the CPU module.
If a slave station cannot be monitored due to an error such as cable disconnection, directly connect the engineering tool to the
slave station.
2.
Start the CC-Link IE TSN/CC-Link IE Field diagnostics.
[Diagnostics]  [CC-Link IE TSN/CC-Link IE Field Diagnostics]
3.
When the following window opens, select the CC-Link IE TSN Plus module to be diagnosed and click the [OK] button to
start the CC-Link IE TSN/CC-Link IE Field diagnostics.
Modules are listed in the order configured in module information.
When multiple CC-Link IE TSN Plus modules with the same network number are mounted on the same base
unit, the module with the smallest slot number on that base unit is always diagnosed, regardless of setting.
17 CHECKING THE NETWORK STATUS
374
17.1 Checking the Status of CC-Link IE TSN