Mitsubishi Electric MELSEC iQ-R Series User Manual page 143

Others
Function
"CC-Link IE Parameter setting of a
TSN slave station
Configuration"
window
Detection of connected/
disconnected devices
Parameter processing of
a slave station
Command execution to
slave stations
Reserved station setting
Error invalid station setting
Slave station parameter automatic setting
Data collection using CC-Link IE TSN
Communication Software
Description
Sets parameters of slave stations (the number of points
and assignment of link devices) in the master station.
Detects connected slave stations and the stations are
displayed on the "CC-Link IE TSN Configuration" window.
Reads and saves the parameters from the slave station,
and writes the saved parameters to the slave station.
Executes commands to a slave station (Error clear
request, Error history clear request).
Reserved station is a slave station that is set in the
parameters and included as a station in the network when
its number is counted. This station reserved for network
extension in the future, and thus the station is not actually
connected, and is not detected as a faulty station despite
being not connected.
An error invalid station is a slave station that is set to be
not detected as a faulty station by the master station.
Parameters of the slave station are saved in the master
station, and the parameters will be automatically set when
the slave station is connected/returned.
Receives cyclic data on CC-Link IE TSN using CC-Link IE
TSN Communication Software.
For details on the CC-Link IE TSN Communication
Software, refer to the following.
 CC-Link IE TSN Communication Software for
Windows User's Manual
Availability Reference
Master Local
station station
 
Page 97 Parameter
setting of a slave
station
 
Page 101
Connected/
Disconnected
Module Detection
 
Page 104 Parameter
processing of a
slave station
  Page 106 Command
execution to slave
stations
 
Page 209 Reserved
station setting
  Page 209 Error
invalid station setting
 
Page 210 Slave
station parameter
automatic setting
  Page 211 Data
collection using the
CC-Link IE TSN
Communication
Software
9 FUNCTIONS
9.1 Function List
9
141