Mitsubishi Electric MELSEC iQ-R Series User Manual page 123

■Connections: Class3/UCMM tag
Item
Connection Name
Connection No.
Data Type
Tag Name
Tag Name Size
Size
Comment
Description
Displays the connection name.
Set the connection number.
The default value is the minimum value from the unused connection numbers
in the connection list.
Set the data type for the tag.
• INT: Signed 16-bit data
• DINT: Signed 32-bit data
Set the tag name.
The connection number with the minimum digit is set as a default value.
Displays the number of characters in the string displayed in "Tag Name".
(Unit: Characters)
Set the size (the number of elements for INT/DINT type data).
The size setting range depends on the setting of "Data Type".
• For INT: 1 to 249
• For DINT: 1 to 124
Set comments to the connection if required.
Setting range

001 to 256
(Default: Refer to the left.)
• INT
• DINT
(Default: INT)
Up to 255 characters
(Default: Tag001)

1 to 249
(Default: 1)
Up to 32 characters (one-byte or two-
byte)
(Default: empty)
8 PARAMETER SETTINGS
8.2 EtherNet/IP Parameter Settings
8
121